Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

The Henriks 159 mandola build
http://www-.luthiersforum.com/forum/viewtopic.php?f=10128&t=45464		 Page 1 of 1
Author:  Puresoundguitar [ Tue Mar 31, 2015 5:19 pm ]
Post subject:  The Henriks 159 mandola build
Hi everyone,

I've been wanting to start a build along thread for a while now so here goes.

This is an electric mandola that I'm building as one of my commercial instruments. The number one will be for a friend of mine.

Scale length will be 15,9 inches. Mostly mahogany with a maple top, and with a nice wenge fretboard.

The idea will be to have a hollow body, and try to mix a piezo with a kent armstrong magnetic pickup.

Here are some pics:

Image

Image

Image

I'll be posting progress pic here, along with comments on the different techniques used, with lot's of CNC content :)

What do you think?
Author:  Quine [ Wed Apr 01, 2015 8:26 am ]
Post subject:  Re: The Henriks 159 mandola build
Nice body shape. I like your fingerboard inlays.
Author:  WudWerkr [ Wed Apr 01, 2015 2:47 pm ]
Post subject:  Re: The Henriks 159 mandola build
Like the whole concept . I will be watching this one closely
Author:  Ken McKay [ Tue Apr 21, 2015 9:42 pm ]
Post subject:  Re: The Henriks 159 mandola build
Hey Dan, just noticed this.
Where is the progress?
Love the design.
Author:  Puresoundguitar [ Mon Apr 27, 2015 8:31 pm ]
Post subject:  Re: The Henriks 159 mandola build
Ken, that's what I call good timing :)

Here's a small update. I'm getting the whole process going slowly, but today I got around to make the top contours.

Notice the two dowel holes that will allow a perfect alignement with the mahogany back (next to be machined).

And also the somewhat stone-age CNC setup... a proper t-slot table top will be soon installed.

Questions or comments...fire away!

Image

Image

Image

Image
Author:  Ken McKay [ Mon Apr 27, 2015 10:55 pm ]
Post subject:  Re: The Henriks 159 mandola build
Nice. But I can't see the dowel holes


Sent from my iPhone using Tapatalk
Ken
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/